Swimming Pool Resurfacing Brings Life Back to your Old Pool

At Fibrestyle, swimming pool resurfacing is our specialty. A good resurface doesn’t just make a pool look great again, it can add up to 20 years to its life. We resurface every type of pool, whether it’s fibreglass, vinyl-lined, concrete or pebblecrete, using proven methods that give a tough, long-lasting finish.

An old pool needs more than a quick patch-up. With Fibrestyle you get a solution suited to your particular pool, proper workmanship and materials that are built to last.

Why Swimming Pool Resurfacing is Essential

Even a well-looked-after pool wears down over the years. Cracks, leaks, fading and rough patches creep in, and they affect both how the pool looks and how safe it is to use. That’s where our swimming pool resurfacing comes in. A few of the things you get out of it:

• A fresh look: no more stains, fading or patchy spots.
• A stronger pool: our methods firm up the structure and add years to its life.
• Safer to swim in: rough and cracked surfaces are smoothed right out.
• Easier on the budget: it costs a fraction of what a full replacement would.

Our Swimming Pool Resurfacing Services

We tailor the job to whatever pool you’ve got:

1. Fibreglass Pool Resurfacing

Fibreglass pools are tough, but the gel coat doesn’t last forever. Give it time and it can fade, blister or crack. We bring the pool back by laying down a fresh, high-quality gel coat that sharpens the look and helps keep osmosis (water getting into the fibreglass) at bay.

What you get: protection against expensive structural damage, a smooth and glossy finish restored, and better resistance to UV and pool chemicals.

2. Vinyl Pool Resurfacing

Vinyl liners tend to tear, wrinkle and fade with age. We swap the old one out for a premium, hard-wearing liner that gets the pool both working and looking right again.

Why ours stack up: liners cut to fit your pool exactly, a good range of colours and designs to choose from, and tough material that shrugs off punctures and chemicals.

3. Concrete Pool Resurfacing

Concrete pools are seriously sturdy, but they still crack, chip and roughen up over the years. We repair any structural damage first, then apply a hard-wearing new finish, whether that’s tiling, pebblecrete or an epoxy coating.

What it gives you: lasting protection against cracks and wear, a choice of finishes from modern tiles to textured surfaces, and better water retention and structural strength.

4. Pebblecrete Pool Resurfacing

Pebblecrete gives a lovely natural, textured look, but it goes rough and tired after enough years in use. We strip back the worn layers and lay a fresh, quality pebble finish over the top.

What you gain: a smooth, safe surface to swim against, that natural pebblecrete look back again, and better resistance to the weather and pool chemicals.

Why Choose Fibrestyle for Swimming Pool Resurfacing?

We bring together know-how, good materials and methods we’ve refined over time, which is why homeowners around the country keep coming back to us:

• Plenty of experience: we’ve been resurfacing pools for years, so we know how to get it right the first time.
• Tailored to your pool: every pool is different, so we assess yours and shape the work around what it actually needs.
• Results that last: our resurfacing can add up to 20 years to the life of a pool, which is hard to beat for the money.
• Quality materials: we only use top-grade products, for the sake of durability, safety and the finish.
• Looked after throughout: from the first chat to the final once-over, we keep the whole thing straightforward and stress-free.

Signs Your Pool Needs Resurfacing

If any of these sound familiar, it’s probably time to look at resurfacing:

• Cracks or leaks: structural cracks can quietly cost you a lot in lost water.
• Rough or uneven spots: uncomfortable underfoot, and they can cause the odd scrape.
• Staining or discolouration: fading and stubborn stains take the shine off the whole pool.
• Blistering or peeling: especially common on fibreglass and vinyl pools.
• A dated finish: a good reason to upgrade to a more modern, better-quality surface.

Leaving these to fester only makes the damage worse and the repair dearer, so it’s worth acting sooner rather than later.

The Swimming Pool Resurfacing Process

Here’s how we work through a resurface:

1. Inspect and talk it through. We have a good look at the pool, work out what’s wrong and recommend the best way forward.
2. Prep the surface. Old coatings, rough patches and any damaged liner come off to leave a clean base.
3. Make repairs. Structural cracks and leaks are fixed so the result holds up long-term.
4. Apply the new finish. On goes the new surface, whether that’s a gel coat, vinyl liner or pebblecrete, done carefully and evenly.
5. Finish off. We smooth everything down and get the surface ready for refilling.
6. Final check. We go over the whole pool before handing it back, so you know it’s right.

Cost of Swimming Pool Resurfacing

What you’ll pay for a resurface depends on the type and size of your pool and how much repair work it needs. Our pricing is competitive and we don’t cut corners to get there. Get in touch for a personalised, no-obligation quote.

Frequently Asked Questions (FAQs)

Q: How long does pool resurfacing take?

A: Usually 5 to 10 days, depending on the size and condition of the pool.

Q: Can you resurface any type of pool?

A: Yes. We work with fibreglass, vinyl, concrete and pebblecrete pools.

Q: How long will my pool last after resurfacing?

A: A quality resurface can add up to 20 years to its life.

Q: What finishes do you offer?

A: Gel coats, vinyl liners, epoxy coatings, tiles and pebblecrete finishes.

Contact Fibrestyle for Swimming Pool Resurfacing

Keen to bring your pool back to life? We’ve got a resurfacing option to suit, whatever you’ve got, fibreglass, concrete, vinyl or pebblecrete. We’ll have it looking as good as new.

Give us a call today for a free swimming pool resurfacing quote, and we’ll get your pool ready for the family to enjoy for years to come.